What about sites for the 360/408 stoker swap?
-geoff
On 4/10/01 9:51 PM, "Mark Kuzia" <flyboy01@mediaone.net> wrote:
> Go to my website and read up. Others have also done the swap, even in 4x4's.
> I have run a 318 comp with #30 injectors on my stock 360, 24's worked in the
> summer, but I had quite a few lean backfires. The 24's work fine now with a
> Mopar 360 comp and a big cam. It all depends on how stock the engine is, you
> are much better off with a Mopar PCM and then adding bigger injectors later.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> 360ci, 5-spd, 4.11 LS(8 3/4 [3.90 SG] coming soon)
>
>
> ----- Original Message -----
> From: <KenneallyIII@Gateway.net>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, April 10, 2001 10:56 PM
> Subject: DML: Gen 2 360 swap
>
>
>> Has anyone out there swapped a 360 into a gen 2 Dakota? I know everything
>> physically bolts in, but I would like to keep my '93 4x4's stock SFI. I've
>> heard conflicting stories from people in the past about whether or not the
>> 318 computer can successfully run a 360 (with larger injectors,of course).
>> Anybody?
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:00 EDT