Thanks. I wil do so.
----- Original Message -----
From: Andy Levy <andylevy@bigfoot.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Thursday, April 12, 2001 5:06 PM
Subject: Re: DML: Intake Problems
Chris,
A contact I have who has the Akimoto suggested you drop a note to Jim
Harmon, jdharmon@earthlink.net
Chris DeCrease wrote:
> This is kinda hard to explain. My Akimoto intake is 2 pieces. The filter
and
> it's housing, and the intake tube. The filter is glued to the housing and
> the housing is clamped to the tube. The tube is clamped to the airhat. Ok,
> here's my problem. The filter has come unglued from it's housing. I think
> this is due to heat, but I'm not sure. What should I use to glue it back
> on?? TIA
>
> Chris DeCrease
> 97 V6 Sport 4x4
> 2000 Pontiac TA
> 2001 Suzuki GSX-R (on the way)
> www.angelfire.com/extreme2/chrisnlisa00
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:01 EDT