Geez...I hate that when my injector leaks! ;-p
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of bernd@texas.net
Sent: Tuesday, April 24, 2001 7:12 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Rough idle at start-up
Hey Aaron,
I f you ca get your hands on a vacuum gauge, hook it up and i'll bet ya the
vacuum reads about 10" at idle on initial cold startup. If it does, turn
off
the engine and pull the plugs. I'll bet ya one of them is a little bit wet.
I had the pretty much same problem and it turned out to be a leaky injector.
- Bernd
> ------Original Message-----
> From: owner-dakota-truck@buffnet.net
> Subject: DML: Rough idle at start-up
>
> I've been having a little "problem" for about a week. The truck seems to
> start up as normal...no extra cranking or anything. But, once it's
started,
> it runs really rough. Actually, sounds kinda cool but it shouldn't be
doing
> that. About 30 seconds to 1 minute later it smooths out. Any ideas on
what
> might be causing this?
> --Aaron--
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:09 EDT