Bob,
I used a blend to try and maintain some compliance with the "must use Mopar
MTL only" shtick. The plan was to try and keep the fluid fairly close to the
amber/slightly red color and still get some of the benefits of the Redline
oil. Didn't really work. fluid looks quite a bit more red than the Mopar
stuff. Damn! If I do have warranty issues I will swap out the fluid for
100% Mopar stuff before going to dealer. I was also doing this on the advice
of another DML'er (forget who) who had tried this and had good results. In
retrospect, I probably should have gone with 100% Redline (2/3 MTL and 1/3
MT-90).
Andrew
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:10 EDT