Re: Badge removal

From: Stephen Reill (sreill@OPTONLINE.NET)
Date: Wed Apr 25 2001 - 12:36:43 EDT


If anyone has or is thinking about removing their v8 emblems, let me
know..I have a 01 and Dodge stopped putting them on..I would like a set.

----------
> From: Hoegen <hoegen@kersur.net>
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: Badge removal
> Date: Wednesday, April 25, 2001 8:13 AM
>
> Thanks Zeus...I got them off. I actually used a little fishing line which
> did the trick fine. I have a 99 so there are holes, but they are painted
so
> I don't have to worry about rust for the day or two that they are
exposed.
>
> I hope the new badges have the adhesive on them?? Originally I planned to
> use 3M two sided tape...but it's alot thicker then the stock adhesive.
> <DAK4JLB@aol.com> wrote in message news:d5.58a84da.281811af@aol.com...
> > it will take a while for the heat to get through those thick badges but
> yes
> > that is what you do. Now, if you have 97-up model you will have holes
left
> in
> > the fender because the badges have prongs that stick off of the back of
> the
> > badge, I'm not sure about the Gen I or Gen II Daks though, just Gen
III.
> >
> > Zeus
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:11 EDT