Possibly a Canada only thing? I will keep my eye out for other Daks to see
if they have them. Maybe they sold me a 2000 :)
Mike
""Hoegen"" <hoegen@kersur.net> wrote in message
news:9c830r$jpf$1@bent.twistedbits.net...
> Strange Mike...all the 01 and up I have seen do NOT have the fender
badges??
> ""Mike"" <spammikeREMOVE@home.com> wrote in message
> news:9c7mpt$8tb$1@bent.twistedbits.net...
> > My '01 has a set of V8 badges (sport 4.7L), not sure why yours does not.
> >
> > Mike
> >
> > "Stephen Reill" <sreill@OPTONLINE.NET> wrote in message
> > news:0GCC0038UWT9W2@mta8.srv.hcvlny.cv.net...
> > > If anyone has or is thinking about removing their v8 emblems, let me
> > > know..I have a 01 and Dodge stopped putting them on..I would like a
set.
> > >
> > > ----------
> > > > From: Hoegen <hoegen@kersur.net>
> > > > To: dakota-truck-moderator@bent.twistedbits.net
> > > > Subject: Re: DML: Badge removal
> > > > Date: Wednesday, April 25, 2001 8:13 AM
> > > >
> > > > Thanks Zeus...I got them off. I actually used a little fishing line
> > which
> > > > did the trick fine. I have a 99 so there are holes, but they are
> painted
> > > so
> > > > I don't have to worry about rust for the day or two that they are
> > > exposed.
> > > >
> > > > I hope the new badges have the adhesive on them?? Originally I
planned
> > to
> > > > use 3M two sided tape...but it's alot thicker then the stock
adhesive.
> > > > <DAK4JLB@aol.com> wrote in message
news:d5.58a84da.281811af@aol.com...
> > > > > it will take a while for the heat to get through those thick
badges
> > but
> > > > yes
> > > > > that is what you do. Now, if you have 97-up model you will have
> holes
> > > left
> > > > in
> > > > > the fender because the badges have prongs that stick off of the
back
> > of
> > > > the
> > > > > badge, I'm not sure about the Gen I or Gen II Daks though, just
Gen
> > > III.
> > > > >
> > > > > Zeus
> > > >
> > > >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:11 EDT