Thanks Zeus...I got them off. I actually used a little fishing line which
did the trick fine. I have a 99 so there are holes, but they are painted so
I don't have to worry about rust for the day or two that they are exposed.
I hope the new badges have the adhesive on them?? Originally I planned to
use 3M two sided tape...but it's alot thicker then the stock adhesive.
<DAK4JLB@aol.com> wrote in message news:d5.58a84da.281811af@aol.com...
> it will take a while for the heat to get through those thick badges but
yes
> that is what you do. Now, if you have 97-up model you will have holes left
in
> the fender because the badges have prongs that stick off of the back of
the
> badge, I'm not sure about the Gen I or Gen II Daks though, just Gen III.
>
> Zeus
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:12 EDT