ok now for the sides. The first time you ever do it it is tough. First of
all drop the tail gate. then remove the two screws on the side. The you
need to pull straight out. there are two tubular thingys that go straight
toward the front of the truck. The have a large head which needs to pop
past the hole. Just carefully pull straight out.
As for the front marker lenses. If you want the clear triangle corner you
need to remove the amber part as well. First of all you need to remove one
long screw in between the corner of the head light and the marker lense.
Once you do that just pull straight out. There are little guides that you
need to follow. The wires for the bulbs are really short so be careful.
Good luck
Tim Althoff
http://www.angelfire.com/oh3/yllw/dkta.html
<http://www.angelfire.com/oh3/yllw/dkta.html>
99 Solar Yellow RC V-6 Manual
<http://www.angelfire.com/oh3/yllw/dkta.html>
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Thumper
Sent: Saturday, April 28, 2001 12:40 PM
To: DML
Subject: DML: Removing lenses
Hey all,
Just wondering if any of you have any tips on removing
a.) Tailights
b.) front marker lights (the clear triangle piece)
Was going to install strobes tomorrow (Sunday) and thought I would ask all
of you if there should be anything I need to look out for. Thanks,
Bill Boggs
ICQ# 96440831
thumper72@lvcm.com
http://www.lvcm.com/thumper/white_lightning.html
"White Lightning"
2001 CC 2WD Sport+ 4.7 Auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:14 EDT