"jay & dana" <jay&dana@telus.net> wrote:
> Hi Bernd
> Checked out your site again looking for a part # for the Robert Shaw
> Thermostat. You use a 370-180, but as I recall I saw some recommend a
> #755-180. Is there a difference or which part # would you recommend for a
> 1997, V-8 (318)?
Jay,
The 370-180 will only work if you've got an MPI intake manifold. If
you've still got the stock intake, I think you'll want a 400-180 or a
GT755-180. The 755 is the "Generation Two" which is supposed to be a
longer life t-stat. I don't know too much about 'em though; go to your
local parts store, check 'em both out and buy the one that gives you the
fuzziest feeling. :-)
-Jon-
.--- Jon Steiger ---------- jon@dakota-truck.net or jon@jonsteiger.com ---.
| Affiliations: AOPA, DoD, EAA, NMA, NRA, SPA, USUA; Rec & UL Pilot - SEL |
| '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
`------------------------------------------ http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:25 EDT