RE: Re: RE: Re: RE: Crane roller rockers

From: Ronald Wong (ron-wong@home.com)
Date: Sat May 05 2001 - 18:19:59 EDT


You need new gaskets, but that's not your big problem. You need the Magnum
valve covers otherwise your new rockers are gonna rock on the baffles of
your current valve covers.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kevin
Sent: Saturday, May 05, 2001 3:18 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Re: RE: Crane roller rockers

Thanks for all the advice with the rockers. I ordered the 1.7's yesterday.
Do Dak's have re-usable valve cover gaskets, or do I need to get new ones?
THIS should be the last question.
----- Original Message -----
From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, May 05, 2001 1:14 AM
Subject: DML: RE: Re: RE: Crane roller rockers

> Hi Kevin,
> I changed both. The geometry is slightly different from the stock setup.
> The pushrods for the roller rockers are .070" shorter than the stock
length.
> I did a little checking, and it appeared you could probably get away with
> using the stock length pushrods. But the pushrods that come with the
roller
> set are Chromemoly steel. Much stronger than the stock ones.
>
> The Crane part number for the "Energizer" rocker set is 11746-16. Same
set
> from Mopar is P5249800. Hope this helps. Let me know if you have any
other
> questions.
> Rich
>
> -----Original Message-----
> From: Kevin [mailto:ksmith@korea.com]
> Sent: Friday, May 04, 2001 9:44 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: RE: Crane roller rockers
>
>
> Rich did you change push rods or keep the stock rods?
> ----- Original Message -----
> From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
> To: <dakota-truck@buffnet.net>
> Sent: Friday, May 04, 2001 9:38 PM
> Subject: DML: RE: Crane roller rockers
>
>
> > Kevin,
> > Yeah, I've been using them. They work nice, no complaints. I just
> recently
> > found out the Mopar roller rockers are Crane roller rockers.
> > Rich - Ashburn, VA
> >
> > -----Original Message-----
> > From: Kevin [mailto:ksmith@korea.com]
> > Sent: Thursday, May 03, 2001 7:02 PM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Crane roller rockers
> >
> >
> > Anybody running either the 1.6 or 1.7 ratio Crane roller rockers on
their
> > magnum engines? Any problems with installation? Thanks for any info
> >
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:25 EDT