Hey guys, Hellwig discontinued their air suspension line, so you won't be
able to buy their airbag kit anymore.HTH,
Will Coughlin willcoughlin@hotmail.com
'00 reg.cab,2wd,4.7L/NV-3500HD5-spd/3.92sg(9.25")
http://www.geocities.com/willcoughlin/index.html
----Original Message Follows----
From: Neal Arita <neal@heide-cook.com>
There was no drilling required on the Hellwig set. Other brands requiring
drilling the frame for mounting the bracket.
As for valve mounting, I mounted the two (2) air valves on my bumper, below
the license there are two nubbies, perfect for these valves.
A note to consider: These air bags require separate valves. I found that
they cannot be mounted on a single air valve, like air shocks can. What
happens, is that when the load shifts (in a turn) the air is simply
"squeezed" out of one and into the other. You could put a valve between the
two, to balance the pressure and close it off when you're using it - it
works for me. Otherwise you need to be certain that you have equal pressure
in both bags.
Neal Arita - from Hawaii
'97 CC, 5.2, Auto
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:26 EDT