Yep, that's what I want. Apparently there is an option where those do light
up. It's in my FSM. That triangular piece is made for cornering lamps. I
believe that at the PDC there is a 25-pin connector and pins 23, 24, & 25
are hot during turn signal operation and do not go through the flasher.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Chris Oertell
Sent: Monday, May 14, 2001 7:35 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: RE: Clear Corners installed
Ron,
Are you referring to the piece that doesn't have a light in it? So if I
read you right you want it to light up like a Buick or Cadillac does when it
turns?
Chris Oertell
Arcadia, CA
http://www.dodgetruckonline.com
coertell@earthlink.net
1998 Dodge Dakota Sport V6 Regular Cab Emerald Green
1989 Kawasaki EX500
AOL IM--coertell73
ICQ #--19870422
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Ronald Wong
Sent: Monday, May 14, 2001 6:47 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Clear Corners installed
Hey Bernd,
You didn't have to cut the ridge off the small bulb hole? They fixed that?
Cool! Now how about jerry-rigging a bulb that'll stay on during the turn
for that triangular piece?
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bernd D. Ratsch
Sent: Monday, May 14, 2001 6:25 PM
To: dakota-truck@buffnet.net
Subject: DML: Clear Corners installed
Ok...i've heard of some horror stories with the clear corners as well as
many tips and suggestions on what to do and what to watch out for (thank you
to all who helped).
I received my Clear Corners from Pacific Import/Export and it took no more
than 5 minutes per side to install. They fit perfectly and has all the
required mounting hardware...one screw! :) For $55, they're well worth
it...no hassles, no fussing, no cutting, etc...and they come with the bulbs.
http://www.pacificie.com/dodge.htm
Bernd D. Ratsch
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:29 EDT