As long as your new wiring kit matches up with the colored wires of the
pioneer HU that is all you need to know. The Pioneer wires as well as the
new wires from you new kit will not match the factory wiring! But the
connectors will plug together and everything will be just peachy!
Jason
> -I bought a new Pioneer DEH47DH CD Player today. I also bought a new
wiring
> connector type kit for it. I tried comparing my old wiring kit to the new
> one, but Pioneers colors are different and I dont want to screw things up.
> Can someone please tell me which wire gets connected to which wire. I just
> want to double check of course :)
> Private emails are welcome to GrnDak4x4@Home.Com
>
> Here is what I have from the Pioneer Wiring End:
> -1 White Wire
> -1 White/Black Wire
> -1 Gray Wire
> -1 Gray/Black Wire
> -1 Blue/White Wire; labeled 'System Remote Control'(I dont have a remote,
do
> I just cap this one off?)
> -1 Orange/White Wire; labeled 'ILL'
> -1 Red Wire; labeled ACC
> -1 Thick Yellow Wire; labeled 'Battery', has a fuse on this one
> -1 Black Wire
> -1 Yellow/Black Wire; labeled 'Mute'
> -1 Purple Wire
> -1 Purple/Black Wire
> -1 Green Wire
> -1 Green/Black Wire
>
> On the Gray Connector/Wiring Kit I Bought:
> -1 Yellow Wire; 12V Battery/Constant
> -1 Red Wire; Ignition/Switched
> -1 Orange/White Wire; Dimmer
> -1 Orange Wire; Illumination/Dash Light
> -1 Gray/Black; Right Front Negative
> -1 White/Black; Left Front Negative
>
> On the Black Connector/Wiring Kit I bought:
> -1 Blue Wire; Power Antenna
> -1 Green Wire; Left Rear Positive
> -1 Purple Wire; Right Rear Positive
> -1 White; Left Front Positive
> -1 Gray; Right Front Positive
> -1 Green/Black; Left Rear Negative
> -1 Purple/Black Right Rear Negative
>
> Too many wires.......too long of day..........very simple I am sure. Just
> want to make sure before I solder it all up and shrink wrap it. Thanks a
> ton.
> Kyle
> 93 Dakota 4x4 V6
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:31 EDT