Paul, from my '99 FSM - both the 42/44RE and 46RE call for the following:
filter screws - 35 inch pounds
pan bolts - 150 inch pounds
Cal
----- Original Message -----
From: WPG <wpgottes@worldnet.att.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, May 20, 2001 6:10 PM
Subject: DML: Questions, Transmission
> Anybody with a FSM for a 99.
>
> What is the recommended torque for the transmission filter and pan bolts.
I
> have a R/T so whatever tranny is behind the 360. Also anybody sell an
> aluminum pan for this tranny that has a drain plug so next time I don't
take
> an ATF bath?
>
> Thanks for the info.
>
>
> Paul Gottes
> Virus Free........
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:31 EDT