I've already done that (the magazine was little help at all),
EXCEPT..............I drilled out the shifter housing and the trans and
re-tapped the wimpy 10mm screws with grade-5 bolts (7/16"). I kept stripping
out the bolts from shifting too hard. I really like the shifter except that
it sits about 2" too far to the right.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
~360ci, 5-spd, 4.11 LS (8 3/4 [3.90 SG] coming soon)
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)
----- Original Message -----
From: <Y2KDakuda@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, May 30, 2001 12:53 PM
Subject: DML: Mopar magazine Hurst shifter install
> This month of Mopar magazine has a write up on the Hurst shifter install
on a
> 97 Dakota
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:36 EDT