Just as in the picture on the front of the instructions. (That's the
normal position of the box.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Robert Tucker
Sent: Wednesday, May 30, 2001 4:30 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: IAT Adjuster install
I just got mine installed. Which way do I hold the box to find 12
o'clock? with the switch at the top/bottom/side?
----- Original Message -----
From: <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, May 30, 2001 8:22 AM
Subject: Re: DML: IAT Adjuster install
>
> Wes,
>
> There should be four beige (tube looking) connectors in the box.
>
> - Bernd
>
> > Ok, I read the instructions, and I am not seeing any "quick connect"
> > connecters... unless were talking abou tie wraps. Basically I gotta
> > wire this into my harness, eg, cutting and resolderign etc...
> > correct?
> >
> > WEs
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:37 EDT