Don,
The IAT Sensor is below the TB wiring on the driver-side. Big Brass
Thingy with greyish plug and two wires coming out of it.
What happens? Hehehehe..more power. ;)
- Bernd
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Don Mallett
Sent: Wednesday, August 01, 2001 9:09 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Installing Brend Box question in a 4.7l
Which plug do I wire the IAT adjuster box in to on the 4.7L? Is it the
one on the driver side of the TB pointing straight down into the intake
manifold? I don't need to mess this up. Is this something that the PCM
needs to be reset?
Hooking up the the wiring and all is easy, Its the theory Iım not sure
of. Yea it fools the PCM about the intake air temp. But what happens
after that? I like to understand as much as I can about new toys.
*----------------------------------------------------------------------*
Don Mallett
Y2k QC SLT+
http://Geocities.com/maldbnsf/
http://www.dakota-truck.net/profiles/dakota/QwkvWz@DAJFf6/profile.htm
*----------------------------------------------------------------------*
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:21 EDT