Do you think they'll work these QC/design issues out, or will every one
they make have these problems?
jdharmon@earthlink.net wrote:
> Yes, they had about 40 sets come in a few weeks ago. They filled the
> national backorders and went out of stock again. There are a few
> problems though. Where they pull the lenses from the molds on the inner
> edge, they leave a small 1/2" long chip in the edge. not much, but you
> will notice it. The driver's side ones have a small problem with the
> mold. They apparently rotated the slip ring that the light bulb socket
> fits into about 90 degrees. You have to dremel it out a bit to get the
> lights to go in and lock in place. No big deal. You can't see that
> from the outside.
>
> After installing a set of the chrome back ones and now these, they are
> both nice, depends on the look you want. The faux CF is lighter grey
> than i thought. They look nice though. The chrome ones look good if
> you have very limited chrome on your truck.
>
>
-- -andy andylevy@yahoo.com Maintainer, DML FAQ - http://www.dakota-truck.net/faq/ http://home.twcny.rr.com/andylevy/dakota/ '99 CC 4x4 318 auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:22 EDT