I've got a question in to Amsoil Tech; I'll post their response.
Paul Bumann wrote:
> does the amsoil gear lube contain sulfur?
> ~ Paul
> 98 Dak, RC,Deep Amethyst
> V8/5 Speed/ 3.91 Suregrip
> ----- Original Message -----
> From: "Michael Carr" <michael.carr@sabre.com>
> To: <dakota-truck@buffnet.net>
> Sent: Wednesday, August 08, 2001 1:13 PM
> Subject: DML: Use Motor Oil in NV3500?
>
> > Because a) nothing is too good for my truck, and b) somewhere out there
> > is a product better than the one they used at the factory, I have begun
> > a quest to find the best manual transmission lube for my truck.
> >
> > Here's what I learned so far:
> > 1) Viscosity ratings of motor oils and gear lubes are not the same (40W
> > motor oil is equivalent to 90W gear lube.)
> > 2) DC requirements a lube that meets is specification MS-9224. DC part
> > number 4874464.
> > 3) Finding a low sulfur content lube is important because the brass
> > innerds of the NV3500 will be corroded by sulfur.
> > 4) Sulfur is added in some degree to all gear lubes (giving it that
> > unique smell) to provide critical lubrication properties.
> > 5) Some DMLers use Redline MTL; some MT-90; some a mixture of each. At
> > least one DMLer uses Amsoil Gear Lube. Regardless, each contains
> > sulfur. How much I don't know.
> >
> > Being a fan of Amsoil, I asked an Amsoil Tech to recommend a lube that
> > contains little or no sulfur. What he said floored me: "There is no
> > sulfur in AMSOIL Crankcase Lubricants. Use 5W30 or 0W30, the AMSOIL
> > Series 2000, 0W30 would be best. Note: The 0w30 in place of the 5w30
> > (Chrysler part # 4874464) may improve the stiff shifting problem that
> > the Getrag G360 transmission has had when shifting from second gear to
> > third gear." (I have asked AMSOIL to see in writing a product that meets
> > MS-9224, but have not yet received a response.)
> >
> > On a Dodge Turbo Diesel forum, there was a reference to using of Amsoil
> > 5W30 in NV5600 transmissions with good results. My questions to you
> > all are: What do you think? Can a motor oil protect the transmission
> > as well as the gear lube can? (I know Ford uses ATF in their PSD 6speed
> > gear boxes, so..) Have you or anyone you know used motor oil in a manual
> > transmission? The result? Does anyone want to be the first to try it
> > here?
> >
> >
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:24 EDT