"Bernd D. Ratsch" wrote:
>
> Picked up the Edelbrock spacer (#8902) for $10 and finally got around to
> installing it.
>
> Looks good but will test/play around with it to make sure it doesn't
> (and won't) leak.
>
> http://www.speedtweaks.net/images/ATI_Airhat/
>
> One small tip for the Edelbrock 8902 Spacer and the ATI Airhat:
>
> Put a small bead of silicone around the groove on the spacer (this fits
> inside the airhat...makes a nice seal)
>
> - Bernd
Bernd,
Get rid of that tiny little thing and put an airhat on there with some
volume to it ;-)
http://www.dnai.com/~bobm/images/ip-kn.jpg
No TB adapter and 4" inlet to the airhat. That's an IP intake bolted up
to it with a 3"-4" silicone reducing coupler.
Sorry for the washed out pic. Will try to get some better pics and get
them organized on a web site over the weekend.
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:24 EDT
