sorry didn't find much...If you are REALLY interested...let me know
privately. I have a contact that did this with a 1976 D100.
Tim Althoff
http://www.angelfire.com/oh3/yellowdakota/index.html
99 Solar Yellow RC V-6 Manual
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of yllwdkta
Sent: Monday, August 06, 2001 10:01 PM
To: dakota-truck@BUFFNET.NET
Subject: RE: DML: RE: Chopped Dakota? (Tim)
I would have to say that you would need to cut the glass or get new glass
made. The reason I say that is because if you front wind shield is sloped
you would either have to chop the top lower and then make a more sloped
windshield or shop the roof and lengthen it to keep the same slope. That is
a very messy thing to do. I talked to a guy next to me from Nat's last year
who had a D150 (maybe a 100) with the font of the op chopped 6" and the rear
chopped 4". He also made on door suicide and the other regular. To top
that he chopped the bed 12-16" (can't remember) for a shorter wheel
base...This thing was wild...
Tim Althoff
http://www.angelfire.com/oh3/yellowdakota/index.html
99 Solar Yellow RC V-6 Manual
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of jon@dakota-truck.net
Sent: Monday, August 06, 2001 5:46 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Chopped Dakota? (Tim)
bob <bnich@bellatlantic.net> wrote:
: Ya know.........ya never know :o)
: Bob
:-)
Here's a silly question; when you chop a vehicle, what do you do with
the glass? For the side windows, do you need to cut it, or can you just
leave it as-is but they just don't go "up" all the way anymore? What about
the front and rear glass? I assume you need to have something custom made?
---Jon-
.---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----. | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL | | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly | `----------------------------------------- http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:27 EDT