Thanks Bernd!
-----Original Message-----
From: Bernd D. Ratsch [mailto:bernd@texas.net]
Sent: Friday, August 17, 2001 11:43 AM
To: dakota-truck@BUFFNET.NET
Subject: DML: RE: RE: RE: Need new Clutch on MAGNUM
S/T..long...recommendations nee ded!
Check for excessive hot-spots (black marks on the flywheel surface) and
excessive cracks. Most can be machined (as you should do anyway when
replacing a clutch) but sometimes takes too much off of the flywheel to
be safe (within thickness limits).
- Bernd
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Wisotzkey, Rich
Sent: Friday, August 17, 2001 10:34 AM
To: 'dakota-truck@BUFFNET.NET'
Subject: DML: RE: RE: Need new Clutch on MAGNUM
S/T..long...recommendations nee ded!
Thanks for the information. How do you tell of the flywheel is bad
other than having missing teeth? I know the pressure plate is warped,
and will be replaced with the clutch.
This doesn't sound so bad. Think I'll order up everything necessary and
prepare for an upcoming job. Rich - Ashburn, VA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:27 EDT