All,
I just bought a blown 360 engine out of a van for 60$.
After taking it apart there was a piston in pieces in
the oil pan. Looks like the crank is shot, and it
needs
at least one new piston/rod. Plus one cylinder will
need to be sleeved.
Now for the questions:
1. Anyone have any experience with a 408 stroker? I've
seen the kit offered on a few websites and it sounds
tempting!
2. What are the fuel/injector requirements? Will it
work with a stock 360 computer? How about a 318 Mopar
Performance computer?
3. I think I can put the 408 together cheaper than
putting a supercharger on my 318....But which would
provide more benefit? I'm thinking the torque from the
408 would be better for a heavy 4x4.
Well nobody I know around here in MD has any
experience
with the Magnum motors, so I am going to be relying
heavy on the good people of the DML!!!
More questions to come!
Thanks
Brad
-----------------------------------------------
98 Dakota CC 4x4 5.2L, 3.55LSD, 32x11.5 BFG M/T
Gibson Cat Back Exhaust, JBA headers and Y-Pipe
MP PCM, 180 T-stat, 3923's, Taylor Wires,
Accel Cap/Rotor, Ported TB
-----------------------------------------------
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:31 EDT