Thanks for the info Rich.
Jay
-----Original Message-----
From: Wisotzkey, Rich <Rich.Wisotzkey@gd-wts.com>
To: 'dakota-truck@buffnet.net' <dakota-truck@buffnet.net>
Date: August 22, 2001 5:48 AM
Subject: DML: RE: Made For You wire looms
>Jay,
>They are nice wire looms. If hot for my headers, I'd still have them on.
>You have to take out the valve cover bolts, but don't worrty about leaks.
>The silicone gaskets seal very well. The bolt heads for the looms are
>recessed. Just take one bolt out at a time and replace them. This will
>retain the current seal between the cover and head. I found it necessary
to
>cut a notch in the base of each loom in order to fit down past the outer
lip
>of the valve cover. Don't know if anyone else had this problem or not.
>
>Think you'll like the looms if you get them. Just keep your eye on them
and
>make sure they stay tight.
>Rich - Ashburn, VA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:32 EDT