I assume by looking at the picture that it's a 2wd.
Lower Arm:
1) Front Nut - 130 ft. lbs.
2) Rear Nut - 80 ft. lbs.
3) Ball Joint Nut - 94 ft. lbs.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
Sent: Wednesday, August 22, 2001 7:18 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: torque specs
Tight like my man Barry White =)
I'd use a 24" breaker bar and go till you can't turn it anymore... unless
you've already got a tq wrench, in which case I can't help b/c I dunno what
it is on a Gen III :)
__________________
Jon Smith
Raleigh, NC
'95 CC 318 4x4 auto
344rwhp/424tq
what should the lower a-arm bolts be torqued to ?
Thanks
--Brian 2001 Dakota Quad Cab 4.7 R/T Wheels, 2" drop...more www.detail-zone.com/quad
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:32 EDT