ok... after trying to dremel a hole in the bolts lodged in my heads... I
borrowed a 90degree makita drill from a mechanic frined of mine... and
drilled all the way to the other end of the bolt... all that is fine... I
might have some cheap easy outs or something... but I swear I am putting
quite a lot of pressure ont he easy outs and they are twisting and bending
and getting stripped and stuff.... any advice? I sprayed wd40 in through the
bolt hoping it woudl lube up some of the thread on the other end... but I
have yet to get any play out of them...
WEs
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:33 EDT