Different rebound/dampening rates are recommended for lowered vehicles.
You can get away with stock shocks on a 1" lowering...but not on a 2" or
lower kit. Also, get the shocks recommended with the kit. The stock
shocks are not adequate for lowered performance oriented kits.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Datstein@aol.com
Sent: Sunday, August 26, 2001 4:18 PM
To: Dakota-truck@buffnet.net
Subject: DML: another lowering ?
With all this talk about lowering... what is the practical answer for
lowering a Dak without replacing the shocks? In other words, will the
travel
of a stock shock be ok with a two, three, or four inch drop? When are
different shocks required? Thanks, David
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:33 EDT