The spark is pretty simple. If you have 12 volts going from the ignition
wire to the +coil wire and a good neg coil wire you should get spark out of
secondary (if your coil is good). Can you at least get that far?
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Bernd D. Ratsch
Sent: Saturday, September 01, 2001 12:15 PM
To: dakotart@yahoogroups.com
Subject: DML: Need some help for ideas
Ok, here's the scenario: No Spark
Bypassed MSD and SuperChips ICON and reinstalled factory coil, checked
ASD Relay, Fuse box (had two blown fuses - Horn and Ignition - Replaced
them as well), and still no spark.
Checked Distributor rotor, cap, connections, trigger plate, all check
out fine.
Going through the trouble shooting guides online (FSM) but nothing fixed
yet (still working on it).
Anyone got any ideas?
Thanks,
- Bernd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:43 EDT