The stock wheels have a 5 1/4 backspacing. In the front, I would not go
any deeper than this. In the back, you could get away with another inch,
but I wouldn't push anymore than that.
David
> [Original Message]
> From: <Pukeloser@aol.com>
> To: <dakota-truck@buffnet.net>
> Date: 9/1/01 11:32:07 AM
> Subject: DML: Backspacing ? for 17" gen II rims
>
> Does anyone know what wheel width and backspacing is the max for a 95 2wd
dak?
> I'm sure I can put wider wheels in the rear but I dont know what the
> backspacing limits are for either the front or the rear.
>
> John S
>
> 95 cc 318 auto, transgo shift kit, HE stage II TB and intake, HE 1418
cam,
> 1.6 Roller rockers, MSD digi6+, MSD HVC coil & 8.5 wires, Hp cap + rotor,
MP
> PCM, DT headers, Gibson exhaust (3" from headers back, no cat), 180 stat,
> autolite 3923's, progear DR timing chain, auburn LSD, 4.10 gears,
superior
> axles, K&N X-stream filter system, MP valve covers, 24# FMS injectors,
IAT
> adjuster
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:43 EDT