I'm using a 7-rib Billet 2.40" pulley (not ScottQ's either). I tach out
at 5500rpm (which is high enough for now) without any problems.
Hmmmmm.....bad run of blowers? QA? Interesting.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Tim Berry
Sent: Tuesday, September 11, 2001 5:13 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Re: Superchargers Attn. Tim Berry
What size pulley? I was using the 2.7" for a long time, and the 2.4" is
what broke the belts... plus, dont forget, I tach out at 6K now.. so
that
hurt it even more.... running along at 70, and needing to spank a 01
stang, well.. I call on 2nd gear for that :) that internal belt didnt
like that! :-P
Tim Berry - 97 CC SLT 318 4x2
13.504@101.91 w/ Powerdyne @ 8PSI
Vortech T-Trim ~12-14PSI, Ordered... =D
>
> Psst....11#'s and still going. (Been at 10# without any problems
> either.) ;)
>
> - Bernd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:46 EDT