...and if one injector was bad one would suspect others as well, especially
if they've never been cleaned.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Jayson Woodruff
Sent: Saturday, September 22, 2001 1:06 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: my engine is failing
If your limping along the motor, my first thought is not to take it to
4000rpms.
Jay W
Geoff wrote:
> Hey,
> I'm just trying to make my (95 dak) 3.9 last untill I can get the 318
> built. Recently the engine started making a loud ticking sound as the
> engine approaches 4000 rpm. For some reason my gas milage has gone up in
> the last few weeks but it sounds like crap. I had an injector go bad so I
> replaced that a few days ago and now this. I'm wondering if it's a
bearing
> in the engine because the performance has been pathetic lately. Any
> suggestions would be greatly appreciated.
>
> Thanks,
> Geoff
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:53 EDT