One wire should be for the power, and the other for Ground. Where as befor
you had one power wire, and the horn was just grounded to the chasis by the
screw or bolt that held it on..
----- Original Message -----
From: "Ed Halterman" <OLZNUT@webtv.net>
To: <dakota-truck@buffnet.net>
Sent: Saturday, October 20, 2001 11:05 PM
Subject: DML: Horn Question
> The horns in my QC are just plain weak, and always get plugged up with
> crap when I go off roading due to their placement right behind the
> grill. Anyways, I found me some LOUD A$$ (I tested them) horns off a '79
> Olds. Now, I look at the factory ones, there's 2 wires coming off both
> horns. What are they for, and which one can I tap into? My '97 had 1
> horn with 1 wire, it was simple to switch it out. Do any of you have
> suggestions??
>
> Ed "Olznut" Halterman Sunland, Ca
> '01 Dak Quad Cab 4x4 SLT+ 4.7L V-8, Auto, Bright Silver Aka the "Silver
> Streak"!!!
> '66 Olds F-85, 5.4L V-8, HAS 410hp at the crank, Will be Intense Blue
> next month!!
>
> See the Silver Streak and Project Olds here!!
> www.dodgetruckonline.com/ed.htm
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:20 EDT