Do you have pics or a website? I tried the site you have listed under your
identity tag, but it doesn't work. Have you done any suspension mods?
David
> [Original Message]
> From: Mark Kuzia <flyboy01@mediaone.net>
> To: <dakota-truck@buffnet.net>
> Date: 9/2/01 6:07:12 AM
> Subject: Re: DML: Backspacing ? for 17" gen II rims
>
> Absolutely no rubbing at all.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph "Fastdak"
> ~360ci, 5-spd, 8 3/4 rear / 3.90-SG
> 1994 Dakota 15.36 @ 91.56 mph
> ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
>
>
> ----- Original Message -----
> From: "David Medeiros" <orange383@earthlink.net>
> To: <dakota-truck@buffnet.net>
> Sent: Sunday, September 02, 2001 12:00 AM
> Subject: Re: DML: Backspacing ? for 17" gen II rims
>
>
> > I have 17s on my truck as well. It's not the spindle that's the issue.
I
> > would be worried about the inner side of the tire hitting the frame when
> > lock-to-lock. Can you turn lock-to-lock with that much backspacing? I
> > would be surprised since my stock 94 rubs when at a full turn and I know
> > this is common with the GenIIs.
> >
> > David
> >
> >
> > > [Original Message]
> > > From: Mark Kuzia <flyboy01@mediaone.net>
> > > To: <dakota-truck@buffnet.net>
> > > Date: 9/1/01 9:55:54 PM
> > > Subject: Re: DML: Backspacing ? for 17" gen II rims
> > >
> > > Not true, my truck is using more, with 17's, the wheels clear the
> spindle
> > > completely and you can use more backspacing. When you run the R/T
> wheels,
> > > the wheels have 6 1/2'' b.s., with that much, the wheels actually hit
> the
> > > A-arms.
> > >
> > > Mark Kuzia
> > > flyboy01@mediaone.net
> > > http://people.mw.mediaone.net/flyboy01/home.html
> > > 1995 Dakota 13.79 @ 102.45 mph "Fastdak"
> > > ~360ci, 5-spd, 8 3/4 rear / 3.90-SG
> > > 1994 Dakota 15.36 @ 91.56 mph
> > > ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
> > >
> > >
> > > ----- Original Message -----
> > > From: "David Medeiros" <orange383@earthlink.net>
> > > To: <dakota-truck@buffnet.net>
> > > Sent: Saturday, September 01, 2001 9:34 PM
> > > Subject: RE: DML: Backspacing ? for 17" gen II rims
> > >
> > >
> > > > The stock wheels have a 5 1/4 backspacing. In the front, I would
not
> go
> > > > any deeper than this. In the back, you could get away with another
> > inch,
> > > > but I wouldn't push anymore than that.
> > > >
> > > > David
> > > >
> > > >
> > > > > [Original Message]
> > > > > From: <Pukeloser@aol.com>
> > > > > To: <dakota-truck@buffnet.net>
> > > > > Date: 9/1/01 11:32:07 AM
> > > > > Subject: DML: Backspacing ? for 17" gen II rims
> > > > >
> > > > > Does anyone know what wheel width and backspacing is the max for a
> 95
> > > 2wd
> > > > dak?
> > > > > I'm sure I can put wider wheels in the rear but I dont know what
the
> > > > > backspacing limits are for either the front or the rear.
> > > > >
> > > > > John S
> > > > >
> > > > > 95 cc 318 auto, transgo shift kit, HE stage II TB and intake, HE
> 1418
> > > > cam,
> > > > > 1.6 Roller rockers, MSD digi6+, MSD HVC coil & 8.5 wires, Hp cap +
> > > rotor,
> > > > MP
> > > > > PCM, DT headers, Gibson exhaust (3" from headers back, no cat),
180
> > > stat,
> > > > > autolite 3923's, progear DR timing chain, auburn LSD, 4.10 gears,
> > > > superior
> > > > > axles, K&N X-stream filter system, MP valve covers, 24# FMS
> injectors,
> > > > IAT
> > > > > adjuster
> > > >
> > > >
> >
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:21 EDT