hmmmm.......
i do have flanges on the rear axle...i'm not lookin for canyon carvin...just
a lil better than nothin at all..and 70 bux seems to be a good deal...:o/
~ Paul
98 Dak, RC,Deep Amethyst
V8/5 Speed/ 3.91 Suregrip
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, October 24, 2001 9:38 AM
Subject: RE: DML: Rear Sway Bar
>
> Have one on my '97 2WD as well (Helwig). It's bigger and more sturdy
> than the R/T sway bar...I compared sizes. :)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net] On Behalf Of Kenneth Eng
> Sent: Wednesday, October 24, 2001 9:15 AM
> To: 'dakota-truck@buffnet.net'
> Subject: RE: DML: Rear Sway Bar
>
>
> Isn't the OEM rear sway bar mounted to the rear axle with bushings that
> are bolted to flanges that are welded on the rear axle tubes? Those
> that didn't come with the rear sway bar would not have these flanges.
> JCWhitney sells a complete rear sway bar kit from Helwig for the Dakota
> for around $135. Have one on my 98 CC 4x2.
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:21 EDT