you can buy a kit at AutoZone for $9.95 with all diferent sizes, they remove
fuel lines also!
Tony.
----- Original Message -----
From: DGB <dgbcms@netnet.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Sunday, October 28, 2001 5:09 PM
Subject: DML: Re: Transmission fluid change
> There is a little plastic tool that is split and tapered
> that closes over the tubing, slips up under the nut and
> releases some little clamping fingers. I had one supplied
> with my factory transmission cooler kit. They call those
> connectors quick-change.
>
> Dwight in WI
>
> ----- Original Message -----
> From: "Bill Knight" <wknight40@home.com>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Saturday, October 27, 2001 14:45 PM
> Subject: DML: Transmission fluid change
>
>
> > Went to a Texaco Express Lube to have fluids done.
> Everything went well
> > until they tried to do the tranny fluid. For some reason
> they could not get
> > the lines disconnected to hook up the machine. They spent
> about 30-40
> > minutes trying and the lines just would not release. They
> admittedlly quit
> > before the broke anything, which was very kind of them.
> Anyone have any
> > ideas of getting thes linse to come apart. They look like
> the kind that
> > either squeeze to remove or two small bladed screw drivers
> inserted on
> > either side for removal. The vehicle is a 97 Dakota SLT
> with the V6. TIA
> > Bill Savannah, GA
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:23 EDT