The factory MAP uses a 11-12" vacuum signal from the MAP Port on the TB.
With a bigger cam, which brings the vacuum signal down to 11-12" at
manifold vacuum...plug the MAP port on the TB and move the vacuum line
over to manifold vacuum.
- Bernd
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Terry Herrin
Sent: Wednesday, October 31, 2001 6:44 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: RE: RE: vacum
If this will be designed to compensate for lower vacuum from a big cam,
I will definitely buy one when it's ready!
Terry Herrin
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:27 EDT