Re: ATTN BERND: Gear drive for v6?

From: Wes Weems (wweems@fix.net)
Date: Wed Nov 14 2001 - 17:34:27 EST


I like the whiny noise, so long as its consistent, and doenst sound like
something is broke...

I suspect the 2500-3000 rpm noise is injectors, or maybe something not
tightened down, rattling
the diesel sound at idle could be the timing chain crap, but I dont know
whats involved in pulling timing chain cover (etc, what else is involved.

Wes
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, November 13, 2001 7:43 PM
Subject: RE: DML: ATTN BERND: Gear drive for v6?

> The dual-idler gear drives (Edelbrock, Pete Jackson, Milodon, etc.) make
> a blower-whine type noise. The single idler (only one available for the
> SB Mopar) sounds like the crankshaft falling out of the engine at idle.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net] On Behalf Of Steven T. Ekstrand
> Sent: Tuesday, November 13, 2001 5:49 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: ATTN BERND: Gear drive for v6?
>
>
> Doesn't a gear drive make a lot of noise.... Cool sounding noise, but
> still....
>
> Just making sure you don't go to the gear drive to get quiet and get a
> shock! :-)
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:30 EDT