I was going to use them for my heads, but I had Koffel's do it instead.
Later I checked their porting job against the templates, and it was pretty
close.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph "Fastdak"
~360ci, 5-spd, 8 3/4 rear / 3.90-SG
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)
----- Original Message -----
From: "Doug Myers" <dougmyers@starpower.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Tuesday, November 20, 2001 8:36 PM
Subject: DML: Re: MP Head Porting Template Kit
> Hi Bob,
>
> The part # is P4876413 - Magnum V8 Porting Templates.
>
>
> Doug Myers
> -------------
> '99 Dakota RC/SB 5.9L/5-speed/3.92SG - 14.320@98.46mph (with stock TB)
> K&N Gen II FIPK, Fastman 51.75mm TB, Comp Cams '604 cam, ProGear timing
> chain, MP 2-bbl MPI, MP 1.92" R/T heads, Hughes' roller rockers, MP
polished
> valve covers, ASP crank pulley, MP Headers, 3" Dynomax cat, 3" Flowmaster,
> Magnecor KV-85 8.5mm Race Wires, Melling HV oil pump, Centerforce Dual
> Friction Clutch
>
> "Bob Tom" <tigers@bserv.com> wrote in message
> news:5.0.2.1.0.20011120160939.009f1530@bserv.com...
> > Anyone have the part number for this kit readily available?
> > TIA.
> >
> > Bob Tom Burlington, Ont., Canada
> > '97 Dakota Sport, 4x2, CC, Flame red, 5.2L, auto., 3.92SG
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:32 EDT