97 won't work correctly, the linkage is different, and the '96 and up
TBs don't have the small idle ports drilled in them (not needed on '96
and up).
Sam
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Geoff
Sent: Thursday, November 29, 2001 2:49 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: RE: TB's and throttle cable.
Someone just emailed me and said that they have a 97 v8 tb. Would that
work
with my existing cable or will I have to replace it anyways?
Thanks again
Geoff
""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
news:000001c17843$c20194b0$040aa8c0@homenet.com...
> All you need to do is swap the linkage and cable.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Geoff
> Sent: Thursday, November 29, 2001 1:10 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: TB's and throttle cable.
>
>
> Hi
> I was just looking at the tb for my 5.2 which came from a 92 Dak
and
> it uses a different style of throttle linkage than my 95 v6 does. I
> don't see any way that the 5.2 tb will hook up to my throtle cable.
Is
> there an engine swap kit out there that would help me with this, or do
I
> have to buy a TB for a 95 5.2. Could just an old throtle cable from
the
> same year as my v8 work?
>
> Thanks
> Geoff
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:35 EDT