Hi all,
I have a TCI shift kit in my 42RE and I'm rather unhappy with it. (long
story, some my have seen it in past posts) I want to pick up a TransGo kit,
but I need a little info from someone who's used it first. The TCI kit
required installing a drill guide to the valve body and removing a passage
wall. Is this also required as part of the TransGo kit? (the specifics of
what was drilled is not real important due to the fact that the number of
modifications of this type is very limited, there for the chance of it being
the same passage is very high) Also, can someone give me a brief rundown of
the included components, i.e.. spool valves, new separator plates. etc.. I
guess the ideal help would be if someone could scan the instructions and
E-mail me a copy so I could compare them to what was done with the TCI kit.
At least this way I will know if I have to pick up a different valve body or
not. (that would suck) Thanks in advance for any help. Remember, just say no
to TCI.
Mark
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:57 EDT