RE: Re: Quickor Swaybars installed

From: Bernd D. Ratsch (bernd@texas.net)
Date: Wed Feb 06 2002 - 21:46:14 EST


You up? (Hint Hint Hint) ;)

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Mark Kuzia
Sent: Wednesday, February 06, 2002 8:40 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Quickor Swaybars installed

If you are going to Cali, maybe you can get my stuff in the mail by
then........hint...hint...hint....

Mark Kuzia
flyboy01@mediaone.net http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph "Fastdak"
~Supercharged 360ci, 5-spd, 8 3/4 rear / 3.90-SG
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)

----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, February 06, 2002 7:01 PM
Subject: DML: Quickor Swaybars installed

>
> WOW! Nice bars and the installation is very simple. Handles much
> better than with the R/T bars. (BTW: I was using a 32mm bar on the
> front from a '01 R/T which are hollow. The Quickor is a 32mm solid
> bar. The front leaning problem under higher speed turning is greatly
> improved
> now.) - I'll need a new thread for this.
>
> I'll need to test them out a bit more for Quickor but will be
> available after the local shop opens up - pricing to follow (much less

> than Hotchkis though).
>
> I'm also now a dealer for Stillen which includes Cross-Drilled/Slotted

> rotors, rear disc conversion kits, and complete braking system upgrade

> (AP 6-piston calipers included for the front and PBR single piston
> calipers on the rear - 1997-2001 Dakota including R/T's). :) The
> webpage will be going up for that after tomorrow.
>
> "Project ATI R/T" will be receiving the brake system upgrade and will
> be installed while I'm in CA from the 15th-19th. We'll have pictures
> and a full report after I get back.
>
> - Bernd
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:58 EDT