Lumpty-Lumpty-Lump. (Mild lope to it).
The 114 LS is much more "Blower" and MAP friendly than a 112...vacuum
should be right about 12-13" at idle (other mods depending as well).
Move the MAP line to manifold vacuum to keep it within range. You got
the actual valve opening/closing degrees? It would be much easier to
figure it out that just advertised figures. (Ramp degrees will show the
characteristcs of the cam.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Tim Berry
Sent: Wednesday, February 06, 2002 9:12 PM
To: dakota-truck@buffnet.net
Subject: DML: Cam Question - Techie junk...
Anyone know how much vacume a cam with the following specs would pull on
a 360 at idle...? Duration @ .050 lift 218/224 with .528/.536 lift at a
114CL
Also, How would she sound at idle? anyone got any mpegs / wav's of a
similar cam in their truck? please let me know...
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:58 EDT