It should be in the pipe section. I don't know what the name is but I
bought a 3.5" Inside Diameter rubber piece that was 6" long and had screw
clamps on each end. Suggestion to take your PVC pipe with you to make sure
you get the right diameter to fit over the pipe.
Don't worry about the other end, the one I bought closed down by at least
1.5" to the Stock Air Hat and fits flush all the way around. When I get to
my truck next, I'll pull off the text written on it.
Chris
'99 Dakota Sport + CC 4x4 V6 Amethyst
BTW, with your setup, don't remove the rubber piece by the radiator blocking
the airflow until you have something to block water.
----- Original Message -----
From: <NVMYDakota@aol.com>
To: <aol@dakota-truck.net>
Sent: Sunday, February 17, 2002 1:24 PM
Subject: DML: Home Brew Intake Question (real easy one)
> Where or what do you call the 3" flexable piece that you use to connect
the
> pipe to the air hat. I saw saomthing at the Home Depot that was made outa
> stainless steel, but It really didn't look all that air tight, and that is
> definatly important on my air cleaner.. Please Lemme know, I do have to
> drive baout 50Mi to get pretty much anything, but I am really looking to
do
> this mod right the first time...
>
> Thanks
> Greg
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:00 EDT