John,
Stop on by the house if you want and I'll go through the
installation...and reset all the adaptives as well.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of
joel.esler@us.army.mil
Sent: Thursday, February 21, 2002 9:50 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Running with the M1 2bbl
reset the computer
----- Original Message -----
From: John_Neff@Dell.com
Date: Thursday, February 21, 2002 8:49 am
Subject: DML: Running with the M1 2bbl
> I managed to get my headers installed and the rest of the truck back
> together last night, followed by a short run up the road. My initial
> impressions of the M1 2bbl on my truck is a bit confusing. I'm not
> sure how much I do or do not like it since I've been driving my GTA
> for the past 3
> 1/2 weeks. Bottom end is much smoother, though it's hard to tell
> if I lost
> anything or not. Top end pulls harder as the tach does not slow
> down on it's
> climb past 4.5K as it did with the factory manifold.
>
> I should have a better feel for it once I'm used to driving the
> truck again
> and the computer finishes relearning.
>
> John - glad to be back in the Dakota again!
> http://jndneff.home.texas.net/dakota/dakota.html
> <" target="l">http://jndneff.home.texas.net/dakota/dakota.html>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:01 EDT