I second that, completely replace the fluid & bleed the system before
doing anything. 32k is ridiculous unless you ride the clutch or slip it
constantly.. when I sold my last truck it had 115k miles on the stock
clutch (though that's more than I would normally expect)
/Curt
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Jon N. Benignus
Sent: Tuesday, March 05, 2002 9:14 PM
To: dakota-truck@buffnet.net;
dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Re: Clutch gone in 32k
> I have ~40K on my 2K QC clutch. I also have problems getting into first
and
> reverse.
If those are hydraulic units, do what we bikers do. Change the fluid with
a
good quality fluid. Bleed tha cylinder and lines, preferably with a tool
such as a Mity-Vac.
Bet your difficult shifting goes away, unless you have a worn out clutch.
HTH
Jon
STL MO
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:07 EDT