George:
After inspection of the lifter in question, it looks like the
roller on the lifter broke off. The lifter then scraped the lobe
on the camshaft down.
My engine is stock. I can take pix of the lifter and cam shaft if
you (or the list for that matter) is interested...
-travis
>Date: Fri, 08 Mar 2002 16:45:32 -0800
>From: George S Willhite <gswillhite@ualr.edu>
>Subject: DML: Re:Back after 1yr, new camshaft and lifters
>
>Welcome back Travis! Was that a Mopar roller rocker that let
>go or a stocker? Good luck on the new job.
>
>George
>
>>>>>>>>
>>From: Travis Sawyer <tsawyer@watercove.com wrote:
<SNIPPAGE>
>>It took the lifter and subsequently the cam shaft (No 2
>>cyl).
<END SNIPPAGE>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:09 EDT