take a multimeter and set it to resistance, measure the ground lead and a
clean metal frame location to see if the resistance is zero.
Jon
"AlexReed" <alexreed@charter.net> wrote in message
news:3C951DD1.B8FC562A@charter.net...
>
> I just did some more testing, with the headlights on and foglamp switch
> on I used a test light. I attached the clip to the frame, and then put
> the pointer onto the terminals, it lights. So, that means i've got
> power. I guess that means I lack a ground then? Im not sure, if so how
> do I locate it? Thanks.
>
> Xander
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:10 EDT