Generally 1 inch max over your heighth now, if you take the measurements the
front should be 1 inch lwr than the rear.measure from the level ground to
the bottom of fender well.
----- Original Message -----
From: Chris Reck <roadkill47@attbi.com>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, April 02, 2002 4:40 PM
Subject: DML: Re: Re: Torsion Bar Adjustment
>
> How far can you go on this mod? Is there a risk of breaking something?
How
> about alignment?
>
> Chris
> '99 Dakota Sport + CC 4x4 V6 Amethyst
>
>
> ----- Original Message -----
> From: "Kevin Reimer" <kwreimer@msn.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Tuesday, March 26, 2002 4:52 PM
> Subject: DML: Re: Torsion Bar Adjustment
>
>
> >
> > Just look under truck approx in line with the back side of front seats,
> see
> > the torsion bar? it runs from the lwr control arm to the main support,
see
> > the bolt? kinda hidden inside supprt assembly, turn clockwise and take
> > meassurements befor so you know how far you are going. I mark the head
of
> > bolt with blk marker and on support so i know when I get one full turn
on
> > head of bolts.
> > ----- Original Message -----
> > From: Mr. Plow <adam_is_mr_plow@hotmail.com>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Monday, March 25, 2002 11:57 PM
> > Subject: DML: Torsion Bar Adjustment
> >
> >
> > >
> > > Ok, i can't remember the specific process for lifting the front end
> about
> > an
> > > inch by way of adjusting the torsion bars.
> > > I started looking through the archives, and realized it'a almost 3:00
> am,
> > > and i should REALLY be asleep right now...... :)
> > >
> > > Anyways, can someone give me a shout about this? I'll be able to get
to
> a
> > > friend's garage with a lift this week, so i want to do the adjustment
> > then.
> > >
> > > Thanks,
> > >
> > >
> > > The Adam Blaster
> > >
> > > _________________________________________________________________
> > > Send and receive Hotmail on your mobile device: http://mobile.msn.com
> > >
> > >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:18 EDT