You Can use a small 2 jaw puller also and you want to put the jaws through
the slots on the center of the dampner and it will come off rather easy.
dont pull on the outer ring
Scott Q
> From: "Bernd D. Ratsch" <bernd@texas.net>
> Reply-To: dakota-truck@dakota-truck.net
> Date: Mon, 08 Apr 2002 20:31:41 -0500
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: Crank pulley on a 2000 5.9
>
>
> You'll need a gear puller for that.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Nelson C
> Sent: Monday, April 08, 2002 8:08 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Crank pulley on a 2000 5.9
>
>
>
> Hi all,
>
> Is there a trick to removing the crank pulley on a 2000, 360? Do you
> need a special tool, or is there some other trick? Also, if you need a
> tool, any ideas on where to get it, and what to get? Thanks
>
> -Nelson C
> 2000 CC R/T
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:20 EDT