I agree with that...Dakota's torque are great off the line...hehehehehehe
--------------------------------------
Steven St.Laurent
C4i System Engineer
C4i Engineering Branch, PSD, MCTSSA
MARCORSYSCOM, U.S. Marine Corps
Office (760) 725-2506 (DSN Prefix: 365)
"Never be content with somebody else definition
of you. Instead, define yourself by your own beliefs,
your own truths, your own understanding of who
you are. Never be content until you are happy with
the unique person GOD has created you to be."
-----Original Message-----
From: greg conner [mailto:dodgeboy93@hotmail.com]
Sent: Friday, April 26, 2002 10:30 AM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: sway bars installation
well stock suspentioned ricers....shesh..everyones allways trying to
fight...lol.. My friends focus with 205/45/17's and a 3in drop coilover kit
along with front/rear strees bars does eat the dak up in the twisties..but
not in a straight line..=P
>From: Stlaurent Mr Steven <STLAURENTS@MCTSSA.USMC.MIL>
>Reply-To: dakota-truck@dakota-truck.net
>To: "'dakota-truck@dakota-truck.net'" <dakota-truck@dakota-truck.net>
>Subject: RE: DML: sway bars installation
>Date: Fri, 26 Apr 2002 06:32:13 -0700
>
>
>I would have to disagree with outrunning the ricer. I have a ricer and to
>bad you don't live in San Diego. We could test out that theory.
>
>--------------------------------------
>Steven St.Laurent
>C4i System Engineer
>C4i Engineering Branch, PSD, MCTSSA
>MARCORSYSCOM, U.S. Marine Corps
>Office (760) 725-2506 (DSN Prefix: 365)
>"Never be content with somebody else definition
>of you. Instead, define yourself by your own beliefs,
>your own truths, your own understanding of who
>you are. Never be content until you are happy with
> the unique person GOD has created you to be."
>
>-----Original Message-----
>From: Bernd D. Ratsch [mailto:bernd@texas.net]
>Sent: Friday, April 26, 2002 7:00 AM
>To: dakota-truck@dakota-truck.net
>Subject: RE: DML: sway bars installation
>
>
>Greg,
>
>What lowering kit are you using?
>
>- Bernd
>
>-----Original Message-----
>From: owner-dakota-truck@dakota-truck.net
>[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of greg conner
>Sent: Friday, April 26, 2002 6:47 AM
>To: dakota-truck@dakota-truck.net
>Subject: Re: DML: sway bars installation
>
>
>
>The spindels keep the stock geometry thus they use the stock endlinks.
>My
>96 is lowered 2/4 with suspention technique front/rear sway bars....it
>will
>out handel ricers in the twisties now....
>
>have fun
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT